DIY CAN Bus Adapter - Arduino based network adapter - BX
2021年1月1日 · It’s as easy to use as plugging in hardware modules (called shields), uploading a program (called a sketch) by USB and letting it run. There are a few different form factors of the Arduino microcontroller, offering different features.
CAN to USB Interface - Electronics-Lab.com
This handy combination makes a simple task implementing the CAN bus interface. There are three status LEDs: D1 is the status of USB connectivity to the host; D2 shows the CAN bus activity; D3 indicates CAN errors
Creating You Own USB Cables : 6 Steps - Instructables
Creating You Own USB Cables: In honor of the USB contest, and my own passion for making my own wherever I can, I have created what I believe is a totally unique (gasp) Instructable. I could be wrong, of course, but a quick Google search turned up nothing for this, so I'm …
An Open-Source USB to CAN Adapter - CANable
The CANable 2.0 is a small low-cost open source USB to CAN adapter. The CANable enumerates as a virtual serial port on your computer and acts as a serial-line to CAN bus interface. With the alternative candleLight firmware, the CANable enumerates as a native CAN interface on Linux. CANable 2.0 supports both standard CAN and CAN-FD.
Make Your Own USB Adapters : 10 Steps (with Pictures) - Instructables
Make Your Own USB Adapters: I feel like I can't ever find the right wire for the device I am using. I have collected a few adapters and chargers, but they weren't universal enough for my needs. I decided to modify and combine them to make a more complete set of adapters.
Open Source DIY Alta Multitool CAN Bus Adapter
2020年1月12日 · Connect wire 7 to CANH and wire 11 to CANL on the CANable. Connect CANable to any of the USB ports on your laptop. Run "lsusb" command. Among the USB devices you should see one that matches ID below: self._can_source = lawicel. CANUSB (device=device, bitrate=bitrate, filters=filters, Multitool should detect CANbus adapter and start in full mode.
Make Your Own On-The-Go (OTG) USB Cable | Make:
2013年8月22日 · In order for your Android phone or tablet to host a USB device such as an Arduino, you need an On-The-Go (OTG) USB cable. You can buy these for a few bucks online, but if you have an old USB cable around it’s easy and more fun to make one!
DIY USB Cable (separated power and data) - diyAudio
2019年1月31日 · 1) Can I make my own "data" cable - its just a USB-A at one end and a pair of wires? I can then solder to a new USB-B plug, along with a re-used USB-A for the power. My thinking was the quality of the power lead doesn't matter, but the quality of …
Making your own custom USB cables - geekhack
2013年6月18日 · Since USB uses a universal color code, it's pretty easy to make your own cables with an assortment of different USB connectors. This is a handy little pinout for your common USB A connector. When it comes time to solder, just match …
CANbus and USB? : r/VORONDesign - Reddit
2024年4月22日 · By far the cheapest solution as i already have such a diy can cable. 3do can+usb cable. Also tight in drag chain, possibly too tight. Pretty expensive at 16 euros per meter and factoring in shipping costs plus usb sockets. Ebb and beacon over one usb line.
- 某些结果已被删除